Skip to product information
| Pool Alarm | Certified ASTM Safety Specification F2208 | Safe for Pool Owners with Children, Neighbors | Easy to Install with Adjsutable Sensitivity Settings
| Pool Alarm | Certified ASTM Safety Specification F2208 | Safe for Pool Owners with Children, Neighbors | Easy to Install with Adjsutable Sensitivity Settings

Brand: mysite

| Pool Alarm | Certified ASTM Safety Specification F2208 | Safe for Pool Owners with Children, Neighbors | Easy to Install with Adjsutable Sensitivity Settings
$77.61 USD
All Taxes Included & Free Shipping
-849784069
In stock

    Description

    Color Blue, Black
    Power Source Battery Powered
    Product Dimensions 10"L x 10"W x 6.5"H
    Voltage 9 Volts (DC)

    锟�

    • INDEPENDENTLY TESTED RELIABILITY Rigorously tested by two independent labs, our pool alarm meets the stringent requirements of ASTM Safety Specification F 2208, ensuring its reliability and effectiveness.
    • EASY TO INSTALL Installation is as simple as placing the battery in the floating unit, adjusting the sensitivity settings according to your needs, and placing it in the pool. There锟斤拷s no need for drilling or any modifications to your pool area.
    • LOUD AND CLEAR ALERT With an alarm sound of 85+ dB at 10 feet, you'll be immediately alerted, ensuring prompt response to any potential safety concerns. A single alarm unit can effectively monitor a pool up to 20锟斤拷 x 40锟斤拷 in size
    • ESSENTIAL PART OF YOUR HOME SAFETY PLAN The alarm is triggered by objects weighing 15 lbs. or more, making it an ideal safeguard against accidental entries by children or pets.
    • SEASON-LONG BATTERY LIFE Forget about frequent battery changes. Our pool alarm is designed to last an entire swimming season under normal operation, offering unparalleled convenience.
    • ADJUSTABLE SENSITIVITY SETTINGS With its fully adjustable sensitivity settings, the alarm can be tailored to the specific conditions of your pool, preventing false alarms and ensuring accurate detection.

    锟�

    锟�

    Pool Patrol PA-30 Pool Alarm

    The POOL PATROL Alarm is intended to be an additional layer of security to protect your loved ones. The POOL PATROL Alarm is not intended as a life saving device and is not intended to replace any other safety considerations such as: adult supervision, lifeguards, fences, gates, pool covers, locks, etc. The POOL PATROL Alarm may not detect gradual entry into the pool.

    This model has a transmitter and receiver. It is intended to alert you at the pool of any intrusion and will transmit to a receiver located nearby.

    The PA-30 is ASTM F-2208-08(2019) compliant.

    PA-30 contents

    锟�

    • Floating Alarm (Transmitter)
    • Receiver with Power Supply
    • String Kit (String with two black plastic hooks

    锟�

    IMPORTANT

    Turning off the alarm in your pool will not deactivate the receiver alarm inside your house. Turning off the receiver inside your house will not turn off the alarm in your pool.

    Adujstments Image Adujstments Image

    Sensitivity Adustment

    Turning the black flotation base clockwise or counterclockwise raises or lowers the sensing ring with respect to the water. stops. Do not force it. This is the most sensitive position and the position that was used to pass ASTM testing. Moving the float from this position will no longer meet ASTM requirements The closer the sensing ring is to the water, the more sensitive the alarm. Turn the black flotation base gently clockwise until it.

    锟�
    Sensitivity MarksSensitivity Marks

    Sensitivity Marks

    The 锟斤拷Sensitivity Marks锟斤拷 can be used as a general indicator for the sensitivity position. Should the sensitivity need to be adjusted start making adjustments by turning the float only a 褰� turn at a time. Test the alarm after each adjustment. We do not recommend turning the float out more than three full turns.

    锟�

    TROUBLESHOOTING

    Pool alarm will not work.

    Low or missing battery. Replace battery with a new 9V alkaline.

    Pool alarm makes a chirp sound occasionally.

    The battery voltage may be low. Replace battery with a new 9V alkaline.

    Pool alarm was working and now it is not.

    Oxidation can build up on the sensing post. Lightly clean with steel wool.

    Pool alarm gives false alarms.

    Check that the alarm is not near the filter, pump or jets. Be sure the filter inlet

    is pointed downward.

    Water can be heard inside pool alarm.

    Remove battery and return the pool alarm and receiver to Posthaste

    Electronics for service.

    The LED on the receiver does not light.

    Be sure wall transformer is plugged into a 110VAC outlet and the power

    jack is plugged into the receiver. Check that the ON/OFF switch is ON.

    Receiver is turned on but does not work when the pool alarm is

    triggered.

    Receiver may be too far from the alarm. Relocate. Receiver may be in a

    building with metal siding or with foil insulation. Relocate near a window.

    Alarm sounds for no apparent reason.

    A neighbor may have the same alarm.

    Place the receiver in ID mode and train the transmitter to the receiver.

    Placement for one alarm Placement for one alarm

    Alarm Placement for pools 20x40 ft or smaller

    One pool alarm can be used for all pool types. This includes aboveground, in-ground, inflatable and soft side pools.

    Placement for one alarm Placement for one alarm

    One alarm

    Multiple alarms Big Pool Multiple alarms Big Pool

    Multiple alarms

    锟�
    Receiver Receiver

    RECEIVER

    Your receiver works with the pool alarm allowing you to monitor your pool from within your house. When the floating alarm is activated it sends a signal to activate the receiver.

    Transmission Modes

    The receiver has two modes of operation: Serial Number mode (SN mode) and ID mode. When the receiver is in SN mode it will accept the transmission of any Pool Patrol transmitter (this is the default setting). The serial number is common to all transmitters. When the receiver is in ID mode it will accept the serial number plus the ID number of the transmission. The ID number is unique to each transmitter.

    RECEIVER PLACEMENT

    It is best to place the receiver next to a window or wood door adjacent to the pool with-in 200 feet from the transmitter. Do not place the receiver near steel walls, cabinets, on or alongside an electrical appliance, such as a computer, or on a metal surface as this may affect signal reception. The pool alarm will not transmit its signal through the ground.

    锟�

    Shipping Locations: We currently ship within the United States only.

    Shipping Cost: We offer free shipping on all orders, with no minimum purchase required.

    Handling Time: All orders are processed within 1–2 business days (Tuesday through Saturday, excluding public holidays).

    Transit Time:After processing, orders typically arrive within 3–5 business days depending on the destination within the United States.

    Cut-Off Time: Orders placed before 3:00 PM (GMT-07:00) Mountain Time will begin processing on the same business day.

    You can read more details here- Shipping Policy

    We accept returns within 30 days of purchase. Returned items must be unused and in their original condition.

    • Return Shipping Cost: Customers are responsible for return shipping costs unless the item is defective or incorrectly delivered.
    • Return label: Customer responsibility
    • Restocking Fee: No cost
    • Return method : By mail
    • Refund Processing Time: Up to 10 working days

    You can read more details here- Return & Refund Policy

    You may also like